Premium Paint Correction Services in Mequon, WI

We begin with a careful walkaround of your vehicle. Under proper lighting, we look for heavy swirling, isolated scratches, water spots, and signs of previous repair work. During this step, we talk with you about what you notice, what bothers you most, and what you want the paint to look like when we are done. That way, we can recommend a correction level that fits your expectations and budget. 

Next, we move into prep. We wash the vehicle thoroughly, remove embedded contaminants with the right chemicals, and use clay treatment when needed. This step clears off tar, industrial fallout, and other bonded material so our polishing pads touch paint instead of debris. Proper prep lets us correct the surface more effectively and reduces the chance of introducing fresh marks during the process. 

Before we dive into correcting the entire vehicle, we work on a small test spot. Here we experiment with pad, machine, and polish combinations until we find the setup that works best for your paint system. Once we are confident in the approach, we correct the vehicle panel by panel. We carefully cut and refine the clear coat to reach the correction target that we discussed with you when you booked the service. 

After we finish the heavier correction stages, we follow up with a refining polish. This step pulls out extra clarity and gloss, so when you step back, the panels look smooth and even from every angle. We then apply a paint sealant or the protection option you selected. If you decide to upgrade to ceramic coating, we install that at this stage so it can lock in the newly corrected finish. 

To wrap up, we inspect your vehicle again under proper lighting. If we see a small area that needs a little more refining, we address it before you arrive. When you pick up the vehicle, we walk you around it, show you key improvements, and share simple wash and drying tips. Our goal is for you to leave with paintwork that looks as good as possible. 

Wax sits on top of your paint. It can add gloss, but it does not fix the surface underneath. When we correct paint, we are actually reshaping the clear coat so swirls and light scratches are reduced or removed. That is why a corrected vehicle still looks sharp months later, even after the last layer of wax or sealant has worn down. 

Some scratches are simply too deep to chase without cutting away too much clear coat. Our job is to protect the health of your paint, not gamble it all on one or two marks. We will always tell you what is realistic, soften or reduce deeper defects where we can, and focus on overall improvement that you can see from a few steps back, not just with your face up against the panel. 

Correction gives you a clean slate, but it does not make the car bulletproof. Harsh brushes at the automatic wash, dirty towels, or rushed drying can put new marks back into the finish. Part of our handover is showing you better washing habits and talking about options like ceramic coating or paint protection film. If you follow that guidance, you keep the corrected look much longer and get real value from the work we did.